MmowWScribe Blog › international-contract-choice-of-law
BUSINESS GUIDE · PUBLISHED 2026-05-17Updated 2026-05-17

International Contracts: Choice of Law Guide

TS行政書士
Fachlich geprüft von Takayuki SawaiGyoseishoshi (行政書士) — Zugelassener Verwaltungsberater, JapanAlle MmowW-Inhalte werden von einem staatlich lizenzierten Experten für Regulierungskonformität betreut.
Which law governs your international contracts? MmowW Scrib🐮 explains choice of law, jurisdiction clauses, and arbitration across 7 countries. When two parties in different countries sign a contract, a fundamental question arises: if there is a dispute, whose law applies and whose courts hear the case? Without explicit contractual provisions addressing these questions, the answer depends on conflict-of-laws rules that vary by country and are notoriously unpredictable.
Table of Contents
  1. What You Need to Know
  2. How It Works: A Practical Overview
  3. Country-by-Country Comparison
  4. Common Mistakes to Avoid
  5. Next Steps: Get Started Today
  6. Frequently Asked Questions

TL;DR: International contracts should explicitly specify which country's law governs the contract and which courts (or arbitration panel) will resolve disputes — without these clauses, a costly jurisdictional battle may determine both questions.

What You Need to Know

When two parties in different countries sign a contract, a fundamental question arises: if there is a dispute, whose law applies and whose courts hear the case? Without explicit contractual provisions addressing these questions, the answer depends on conflict-of-laws rules that vary by country and are notoriously unpredictable.

The solution is straightforward in principle: include a governing law clause (specifying which country's law governs interpretation and performance) and a jurisdiction clause (specifying which court or arbitral tribunal has authority to hear disputes). Getting both clauses right — and understanding their limitations — is one of the most important things a cross-border business can do.

This guide explains the key concepts and the legal framework across the seven countries where MmowW Scrib🐮 operates. For contract drafting and review, always consult a qualified attorney.

How It Works: A Practical Overview

Governing Law Clauses

A governing law clause designates the legal system that determines the substantive rights and obligations under the contract. For example: "This Agreement is governed by and construed in accordance with the laws of England and Wales, excluding its conflict of laws rules."

Party autonomy: In commercial contracts between businesses, parties generally have broad freedom to choose the governing law, even if it has no connection to either party or the transaction. English law and New York law are the most commonly chosen governing laws for international commercial contracts, because:

Limitations on party autonomy:

Jurisdiction Clauses

A jurisdiction clause designates which country's courts have authority to hear disputes. Two types:

Key limitation: A court's willingness to accept exclusive jurisdiction clauses from foreign courts varies. Within the EU, the Brussels Regulation (Recast) largely enforces exclusive jurisdiction clauses between member states. Post-Brexit, UK courts are no longer bound by Brussels Regulation, creating some uncertainty. The Hague Convention on Choice of Court Agreements provides similar enforcement among signatories (UK acceded separately post-Brexit).

Enforcement of judgments: Winning a judgment in your chosen court is only the first step — you then need to enforce it against the losing party's assets, which may be in another country. Enforcement of foreign judgments varies dramatically. There is no universal treaty for enforcement of court judgments comparable to the New York Convention for arbitral awards.

International Arbitration: The Preferred Alternative

For significant international commercial contracts, arbitration is often preferred over court litigation for several reasons:

Common arbitral institutions for international disputes:

An arbitration clause designates the institution, seat of arbitration (the legal place), language, and number of arbitrators. The seat determines which national law governs the arbitration procedure.

Common Contract Clauses in International Agreements

Beyond governing law and jurisdiction, international contracts should consider:

Use our free tool: Cost Calculator

Try it free →

Country-by-Country Comparison

Country Governing Law Approach Key Arbitration Treaty Preferred Arbitration Seat Key Legal Resource
🇬🇧 UK English law widely chosen; Contracts (Applicable Law) Act 1990 New York Convention signatory (1975) London (LCIA, ICC London) gov.uk/government/collections/arbitration
🇫🇷 France Rome I Regulation (EU) applies to choice of law; CISG signatory New York Convention signatory (1959) Paris (ICC, CMAP) economie.gouv.fr
🇸🇪 Sweden Rome I Regulation applies; CISG signatory New York Convention signatory (1972) Stockholm (SCC) domstol.se
🇦🇺 Australia International Arbitration Act 1974; CISG signatory New York Convention signatory (1975) Sydney/Melbourne ag.gov.au/international
🇳🇿 New Zealand Arbitration Act 1996; CISG signatory New York Convention signatory (1983) Auckland legislation.govt.nz
🇨🇦 Canada Commercial Arbitration Act; CISG signatory New York Convention signatory (1986) Toronto/Vancouver justice.gc.ca
🇺🇸 USA Federal Arbitration Act; CISG signatory (with reserve) New York Convention signatory (1970) New York (AAA/ICDR) state.gov/arbitration

Common Mistakes to Avoid

  1. Omitting the governing law clause entirely. Without an explicit choice, the applicable law is determined by conflict-of-laws rules in whichever court hears the case — and those rules are complex and often unpredictable. Always include an explicit governing law clause in every international commercial contract.
  2. Choosing a governing law without understanding its content. Choosing English law because it sounds sophisticated, without actually understanding how English contract law treats limitation of liability clauses, implied terms, or specific performance, can lead to unpleasant surprises. Choose governing law based on substantive outcomes, not reputation. Consult a qualified attorney familiar with the chosen law.
  3. Combining exclusive jurisdiction with arbitration. An arbitration clause and an exclusive jurisdiction clause for a particular court cannot coexist without confusion — they designate different forums for the same disputes. If you want arbitration, use an arbitration clause. If you want court litigation, use a jurisdiction clause. Not both.
  4. Failing to consider enforceability of judgments at drafting stage. If your counterparty's assets are in a country that does not readily enforce foreign court judgments (some Middle East countries, parts of Asia), a court judgment in your favor may be unenforceable. In these cases, arbitration (backed by the New York Convention) may be significantly more enforceable.
  5. Using a governing law from a country where you cannot afford to litigate. Choosing English law and London arbitration sounds prestigious, but London arbitration for commercial disputes regularly costs USD 500,000–2,000,000+. For smaller contracts, choose dispute resolution mechanisms proportionate to the contract value — expedited arbitration rules, or local courts.

Next Steps: Get Started Today

MmowW Scrib🐮 helps prepare standard international contract templates incorporating governing law and jurisdiction clauses appropriate to your jurisdiction:

MmowW Scrib🐮 is a document preparation service, not a law firm. We do not provide legal advice. Always consult a qualified attorney for international contract drafting and review.

Frequently Asked Questions

Q: Can I choose the law of a country that neither party is based in?

A: Yes, in most commercial contracts between sophisticated parties. English law and New York law are routinely chosen by parties from Asia, the Middle East, and Latin America precisely because they have no connection to those jurisdictions — the choice reflects commercial familiarity and legal predictability, not geographic connection. Consumer contracts are an exception: consumer protection laws typically follow the consumer.

Q: What happens if the contract has no governing law clause?

A: A court will determine the applicable law using its domestic conflict-of-laws rules. Common approaches look to the place of performance, the place where the contract was signed, or (under the Rome I Regulation in EU countries) the characteristic performance of the contract. The outcome can be unpredictable and the analysis expensive. Always include an explicit governing law clause.

Q: Is an arbitration clause enforceable if one party is a consumer?

A: In many countries, arbitration clauses in consumer contracts are voidable or unenforceable as unfair terms. EU consumer law is particularly protective in this regard. In the USA, the enforceability of consumer arbitration clauses (particularly those with class action waivers) is subject to ongoing litigation. For B2B contracts, arbitration clauses are generally well-enforced. Consult a qualified attorney before including arbitration clauses in consumer-facing contracts.

Loved for Safety. MmowW Scrib🐮 — Document preparation made simple across 7 countries.

Free tools to help you get started:

TS
Takayuki Sawai
Gyoseishoshi
Licensed compliance professional helping businesses navigate regulatory requirements worldwide through MmowW.

Ready for complete document preparation?

MmowW Scribe prepares your formation documents, compliance filings, and business paperwork across 7 countries.

Start 14-Day Free Trial →

No credit card required. From $149/month.

Loved for Safety.

Important disclaimer: MmowW Scrib🐮 is a document preparation service, not a law firm. We do not provide legal advice. For legal questions, consult a qualified attorney in your jurisdiction.
Loved for Safety.

Lass dich nicht von Vorschriften aufhalten!

Ai-chan🐣 beantwortet deine Compliance-Fragen 24/7 mit KI

Kostenlos testen